Honeywell Dolphin 7600 Mobile Computer Guia do Utilizador Página 88

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 87
9 - 2 Rev D
11/20/2007
Dolphin® 7600 User’s Guide
Back Panel
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input
voltages between 90-265 volts.
Power Switch
Toggle the power switch to turn the QuadCharger on and off.
Supplying Power to the QuadCharger
Use the power adapter cable that comes with the Dolphin QuadCharger so that the input voltage is adjusted appropriately.
1. Locate the AC power adapter cable and plug it into the power source.
2. Connect the power cable to the power adapter.
3. Connect the power cable to the power supply connector on the back of the QuadCharger.
4. Press the power switch to the ON position.
5. The device performs the following power-up diagnostic routine for each slot indicated by the Status LEDs.:
All ON Orange
delay (500ms)
•All ON Red
delay (500ms)
All ON Green
delay (500ms)
•All OFF
Power Supply Connector Power Switch
Vista de página 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 101 102

Comentários a estes Manuais

Sem comentários