Honeywell Dolphin Demos Manual do Utilizador descarregar pdf (Página 39)

Dolphin® Demos User’s Guide Rev A

8/6/08

8 - 1

Using Image View

Overview

Image View is a software installed on the host workstation and receives data via wireless connection from

the following Demos on the terminal:

• Imaging Demo

• IQ Imaging Demo

• Scan Demo

• Signature Capture Demo

Note: Contact your nearest Honeywell technical support office to retrieve the latest version of Image View.

Requirements

• Image View must be installed and configured on the host workstation.

• Both the Dolphin terminal and Image View on the host workstation must have the same IP address and

TCP port.

Configuring ImageView on the Workstation

1. On the host workstation, click the ImageView.exe file and complete the installation process.

2. Click File > Setup.

3. In the IP Address field, enter the IP address of the host workstation.

4. Use the default Decode Port and Image Port for the host workstation.

5. Tap Apply. The network parameters are set.

6. Now, you need to configure the Demos on the terminal.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46

Sem comentários

Honeywell Dolphin Demos Manual do Utilizador Página 39