Honeywell MS4980 Manual do Utilizador

MS4980 Area Imaging Scanner Installation and User's Guide

6 INSTALLATION RS232 1. Turn off the host device. 2. Plug the 15-pin socket end of the cable into the 15-pin D-Type connector on the MS4980

7INSTALLATION Keyboard Wedge 1. Turn off the host device. 2. Plug the 15-pin socket end of the cable into the 15-pin D-Type connector on the M

8 INSTALLATION USB (Powered by the Host Device) 1. Turn off the host device. 2. Plug the 15-pin socket end of the USB cable into the 15-pin

9INSTALLATION USB (Powered by External Power Supply) 1. Turn off the host device. 2. Plug the 15-pin socket end of the cable into the 15-pin

10 MOUNTING SPECIFICATIONS The MS4980 has three M3 x 0.5 mm threaded inserts on the bottom of the scanner for mounting with screws. Figure 10.

11MODES OF OPERATION The MS4980 supports two standard modes of operation for scanning bar codes, automatic activation and manual activation scann

12 MODES OF OPERATION Manual Activation • Decodes ALL 1D, PDF and 2D matrix codes • Scanning Method: 1. Press the button one time to activate

13INDICATORS Audible When the MS4980 is in operation, it provides audible feedback. These sounds indicate the status of the scanner. Eight se

14 INDICATORS Visual The scanner has blue and white LED indicators on either side of the button on the top of the unit. When the scanner is on, t

15INDICATORS Failure Modes Long Razzberry Tone – During Power Up Failed to initialize or configure the scanner. If the scanner does not respond

Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in t

16 FIELD OF VIEW Figure 13. MS4980 Field of View Specifications are subject to can without notice.

17DEPTH OF FIELD MINIMUM BAR CODE ELEMENT WIDTH 1D PDF A B C D E F mm .132 .190 .264 .330 .190 .381 mils 5.2 7.5 10.4 13 7.5 15 Figure 1

18 IR ACTIVATION RANGE The MS4980 scanner has a built in object detection sensor that instantly turns on the scanner when an object is presented w

19TROUBLESHOOTING GUIDE The following guide is for reference purposes only. Contact a customer service representative to preserve the limited war

20 TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The unit powers up, but does not beep when bar code is scanned. The beeper is disable

21TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The bar code may have been printed incorrectly. Check if it is a check digit/character

22 TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The unit scans but the data is not correct. The scanner and host may not be configured

23DESIGN SPECIFICATIONS MS4980 DESIGN SPECIFICATIONS OPERATIONAL Light Source: LED 645 nm ± 7.5 nm Pulse Duration: Up to 4 mS (Default) Maximu

24 DESIGN SPECIFICATIONS MS4980 DESIGN SPECIFICATIONS ELECTRICAL Input Voltage: 5.2 VDC ± 0.25V RS232, USB w/Power Jack, Keyboard Wedge USB H

25Applications and Protocols The model number on each scanner includes the scanner number. SCANNER VERSION IDENTIFIER COMMUNICATION PROTOCOL(S) M

iiiTABLE OF CONTENTS Introduction Product Overview ... 1

26 CONFIGURATION MODES The MS4980 has three modes of configuration. • Bar Codes The MS4980 can be configured by scanning the bar codes included

27UPGRADING THE FIRMWARE The MS4980 scanner is part of Honeywell’s line of scanners with flash upgradeable firmware. The upgrade process requires

28 SCANNER AND CABLE TERMINATIONS RS232 Keyboard Wedge 15-pin, D-type 15-pin, D-type Pin Function Pin Function 1 Reserved 1 PC Data 2 Rese

29SCANNER AND CABLE TERMINATIONS USB without Power Jack USB with Power Jack 15-pin, D-type 15-pin, D-type Pin Function Pin Function 1 Rese

30 SCANNER AND CABLE TERMINATIONS Cable Connector Configurations (Host End) RS232 PowerLink Cable MLPN 52-52557x-3 Pin Function 1 Shield Ground

31SCANNER AND CABLE TERMINATIONS Cable Connector Configurations Keyboard Wedge PowerLink Cable MLPN 52-52558x -3 Pin Function 1 Keyboard Clock 2

32 LIMITED WARRANTY Honeywell International Inc. ("HII") warrants its products and optional accessories (“Accessories”) to be free from

33REGULATORY COMPLIANCE Safety ITE Equipment IEC 60950-1, EN 60950-1 LED Class 1 LED Product: IEC 60825-1:1993+A1+A2, EN 60825-1:1994+A1+A2

34 REGULATORY COMPLIANCE EMC Emissions FCC Part 15, ICES-003, CISPR 22, EN 55022 Immunity CISPR 24, EN 55024 NOTE: Immunity performance is not

35REGULATORY COMPLIANCE EMC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s autho

ivTABLE OF CONTENTS Scanner and Cable Terminations Scanner Pinout...

36 PATENTS This Honeywell product may be covered by, but not limited to, one or more of the following US Patents: US Patent No. : 5,241,166; 5,7

37INDEX A AC ...2, 24 accessories ...2 adapter ...

38 INDEX P parts ...3 patents...36 pinouts...28–29, 28–29,

39CONTACT INFORMATION The Americas (TA) Germany Guangzhou Sales Office Tel: 86-20-38823476 USA Tel: 49-89-89019-0 Fax: 86-20-38823477 Fax:

40 PRODUCT SERVICE AND REPAIR North America Suzhou Sales Office European Repair Center Tel: 866.460.8033 Tel: 86-512-67622550 Tel: +34 913

NOTES

NOTES

February 2009 70-79037B

1INTRODUCTION Product Overview The MS4980 is a high performance area imaging bar code scanner packed into a small yet rugged form factor. The s

2 INTRODUCTION Scanner and Accessories BASIC KIT Part # Description MS4980 Area Imaging Bar Code Scanner 00-02544 MetroSelect® Single-Line Conf

3INTRODUCTION Scanner Components Figure 1. Scanner Components Item No. Description  Button  Camera Imager  Infrared Sensor (IR)  Targeting

4 INTRODUCTION Cable Installation Important: If the cable is not fully attached, the unit may power intermittently. Figure 2. Cable Installat

5INTRODUCTION Labels Every scanner has a label located on the underside of the unit. The label contains important information such as the unit’