Honeywell K14114 Manual do Utilizador Página 11
- Página / 72
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
LYNXR-I Installation and Setup Guide
- 11 -
AC Power and Backup Battery
The system is powered by a 9VAC, 25VA Plug-in Transformer, ADEMCO K10145X10 (K10145CN in
Canada). Refer to the wiring table below for wire gauge and length.
Use only the provided ADEMCO K10145X10
or K10145CN Transformer.
Distance from Transformer
to Control
Wire Gauge
Up to 75 feet #20
75 to 150 feet #18
150 to 300 feet #16
Wiring to the AC Transformer must not exceed 300 feet using 16-gauge wire. The voltage reading
between terminals 15 and 16 of the control must not fall below 9.00VAC.
Do not plug the transformer into the AC outlet until after all wiring connections have been made.
Backup battery
In the event of an AC power loss, the system is supported by a long life backup battery that is supervised for
connection and for low voltage conditions. If the battery is missing, or a low battery condition is detected, a
“low battery” message is displayed and a report is sent to the central station. In addition, the system will beep
once every 45 seconds to audibly indicate a low battery condition (press any key to stop the beeping).
AC Power and Rechargeable Backup Battery
Connecting AC Power and backup battery
1. Connect wires from the K10145X10 (K10145CN) in
Canada) AC Transformer to terminals 15 and 16 as
shown in the wiring diagram.
2. Remove battery retainer.
3. Peel the backing from tape on the back plate.
4. Insert battery pack into back plate.
5. Install battery retainer.
6. Connect battery connector to receptacle on terminal
block PC board.
7. After all wiring connections have been made, snap the
front assembly to the back plate and plug the
transformer into a 24-hour, 110VAC unswitched outlet.
Note: Rechargeable batteries may take up to 48-hours to
fully charge. The “LOW BAT” message should clear
within four hours or by entering Test Mode.
BATTERY
PACK
07000-007-V0
BATTERY
RECEPTACLE
WIRING
TERMINALS
TAPE
RETAINER
NOTE
LYNXRCHKIT-HC
BATTERY PACK SHOWN
Ensure the cover is snapped closed prior to applying AC power.
- ADEMCO LYNXR-I 1
- Security Systems 1
- BEDROOMBEDROOM 2
- 01000-002-V0 2
- Table of Contents 3
- System Features 4
- WIRE ENTRY 5
- KNOCKOUT 5
- (1 of 3) 5
- Wiring Connections 6
- General 8
- LYNXR-I CONTROL PANEL 9
- Connecting AlarmNet 7845CV2 10
- AC Power and Backup Battery 11
- LYNXRCHKIT-SHA 12
- Installing Wireless Zones 13
- 5800RL DIP SWITCH TABLE 15
- Mechanics of Programming 16
- Pass-Thru Programming 17
- Loading Factory Defaults 17
- General Information 18
- 5806/5807/5808 19
- 01000-020-V0 19
- Data Field Descriptions 20
- b zt 30
- E l 31
- IA LC 32
- Id vi 33
- IE vi 33
- IF vi 33
- Programming Options Defined 34
- 81 Zone List Menu Mode 37
- 83 Enhanced Sequential Mode 38
- VOICE VOCABULARY INDEX 42
- Custom descriptor number 43
- Voice Prompt Programming 44
- System Operation 50
- Testing the System 56
- System Communication 57
- Troubleshooting Guide 59
- Programming Default Tables 62
- – Index – 65
- - 67 67
- Regulatory Agency Statements 68
- Specifications 70
- - 71 71
- ‡K14114ÉŠ 72
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Honeywell K14114
(20 páginas)
(97 páginas)LG 55LW5700 manuali
Manuali dei proprietari e guide per l'utente per TV a LED LG 55LW5700.
We fornisce 1 manuali pdf LG 55LW5700 per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica
Comentários a estes Manuais