Honeywell Electronic Programmable Thermostat Manual do Utilizador

69-0862—21J.S. • Rev. 5-96ElectronicProgrammable ThermostatOwner’s Manual69-0862-2

69-0862—210Maintaining Your ThermostatINSTALLING BATTERIESIMPORTANTBatteries must be installed for programmingand operation of the thermostat and heat

69-0862—211If the batteries are not replaced sometimeduring the flashing bAt Lo, the indicatoreventually stops flashing. bAt Lo stays onwithout flashi

69-0862—212Troubleshooting GuideIF… THEN…Display will not come on. Set the system switch to OFF. Remove batteries. Insertbackward for at least five

69-0862—213Heating will not come on. Check the system fuse or circuit breaker and replace or (Continued)reset, if necessary. If display is blank or

69-0862—214Cooling will not come on. If temperature setting is lower than current temperature,(Continued)and SYSTEM ON indicator is lit, move system

69-0862—215Thermostat current Check that the wiring hole in the wall behind thetemperature setting does not wallplate was plugged with insulation to

69-0862—216NOTICEThis equipment is a Class B digital apparatus, which complies with Canadian Radio InterferenceRegulations, CRC c.1374.

69-0862—217

69-0862—218

69-0862—219Limited One-Year WarrantyHoneywell warrants this product to be free from defects in the workmanship or materials, under normal use and serv

69-0862—22Table of ContentsProgramming Your Thermostat ...

69-0862—220Printed in U.S.A.Printed on recycled paper containing at least 10% post-consumer paper fibers.

69-0862—23Programming Your ThermostatWhen batteries are installed, your thermostatcan be programmed in your hand before it isinstalled or after it is

69-0862—24RETURN is the time the thermostat turnson the heating/cooling equipment afteran energy saving period. When decidingwhat time to set for your

69-0862—25Program ScheduleHEATING PROGRAM SCHEDULEWeekdays Start Time Heating Temperature Cooling TemperatureWAKE __________ ____________________ ____

69-0862—26IMPORTANTBatteries are required for operation andprogramming. When inserting batteries,set the system switch to OFF. Removethe battery door

69-0862—27Press Set Schedule key until WAKE, SA SUand SET appear on the display. Use Time keysto program WAKE time and Temp keys toprogram WAKE temper

69-0862—28Check Current Temperature Setting—PressRun Program key once. If using TEMPORARYCHANGE or HOLD features, pressing this keycancels your chang

69-0862—29SETTING FAN SWITCHFan switching positions are:FAN AUTO: Normal setting for mosthomes. A single-speed fan turns onautomatically with the air