Honeywell Thermostat SERIES 2000 Manual do Utilizador descarregar pdf (Página 18)

63-4356—1 18

TROUBLESHOOTING GUIDE

Symptom Action

Display will not come on. • Check if the circuit breaker is tripped—reset the circuit breaker.

• Check if the fuse is blown—replace the fuse.

• Check if the system switch at the equipment is in the Off position—

set to the On position.

• Check wiring between thermostat and HVAC equipment—replace

any broken wires.

• If 24 Vac is present, proceed with troubleshooting.

Temperature settings will not

change (Example: cannot set

the heating higher or the

cooling lower).

• Check that the temperature setpoints are:

- heating: 40 to 90°F (7 to 31°C)

- cooling: 45 to 99°F (9 to 37°C).

• Keyboard is locked. Contact the installer.

Heating will not come on. • Check if the circuit breaker is tripped—reset the circuit breaker.

• Check if the fuse is blown—replace the fuse.

• Check if the system switch at the equipment is in the Off position—

set to On position.

• If 24 Vac is present, proceed with troubleshooting.

• Wait five minutes for the system to respond.

• Set system selection to Heat.

(Continued)

1 2 ... 13 14 15 16 17 18 19 20

Sem comentários

Honeywell Thermostat SERIES 2000 Manual do Utilizador Página 18